العربية Get a quote

Mining and blasting · In stock in Jeddah

ANFO Explosive Loading Hose – Anti-Static

An anti-static loading hose for charging blast holes with ANFO by pneumatic loader. It carries away static charge built up by the moving prill, guards the blasting circuit against stray current, and stays easy to see underground thanks to its orange stripe.

Applications

  • Bulk loading of ammonium nitrate / fuel oil (ANFO) blasting agents into blast holes with pneumatic loaders and charging units.
  • Open-pit and underground mining: production holes, development faces and up-holes in gold, copper, zinc and phosphate operations.
  • Quarrying for aggregates, limestone and cement raw materials.
  • Tunnelling and shaft sinking on infrastructure projects.
  • Construction blasting for foundations, road cuts and trenching in rock.

Pneumatic charging moves prill at speed through the hose, and friction generates static electricity. A normal plastic hose lets that charge build up near the explosive and the detonators. A loading hose made for ANFO is designed to dissipate the charge in a controlled way, which is why mine and quarry blasting procedures call for it.

ANFO Explosive Loading Hose – Anti-StaticANFO loading hose supplied in coils, orange stripe

Features

  • Static-dissipatingThe conductive compound lets static generated during pneumatic loading drain to ground through the loader instead of building up in the hole.
  • Stray-current resistantIts electrical resistance is set high enough to stop the hose becoming an easy path for stray currents into the blasting circuit.
  • Abrasion resistantSmooth inner and outer surfaces and a tough compound stand up to prill flow and dragging over rock.
  • Self-extinguishingThe material does not keep burning once a flame is removed.
  • Flexible but firmBends easily for handling and coiling, yet is stiff enough to push up into steep and upward holes.
  • High visibilityA continuous orange stripe keeps the hose visible under cap lamps and machine lights underground.

Technical specifications

PropertyValue
Inside diameter (ID)16, 19, 25 and 32 mm (5/8, 3/4, 1 and 1-1/4 in)
Outside diameter (OD)22, 27, 34 and 41 mm (approx.)
Wall thicknessApprox. 3 to 4.5 mm, by size
Coil length30 to 91 m (100 to 300 ft), by size
Max. working pressure120 psi (0.83 MPa)
Burst pressureConfirmed with the quotation
Temperature range-35 °C to +65 °C
MaterialAnti-static (conductive) thermoplastic compound
Stripe colourOrange, continuous along the hose

Values per size are in the table below; burst pressure and the test certificate are confirmed with the quotation.

Sizes in stock

Inside diameterOutside diameter (approx.)Max. working pressureWeight per 100 m (approx.)Length per coil
5/8 in · 16 mm55/64 in · 22 mm120 psi · 0.83 MPa25 kg200 ft · 61 m
3/4 in · 19 mm1-1/16 in · 27 mm120 psi · 0.83 MPa40 kg200 ft · 61 m
1 in · 25 mm1-21/64 in · 34 mm120 psi · 0.83 MPa55 kg300 ft · 91 m
1-1/4 in · 32 mm1-5/8 in · 41 mm120 psi · 0.83 MPa78 kg100 ft · 30 m

Common questions

Why must an ANFO loading hose be anti-static?

Blowing ANFO prill through a hose creates static electricity. If the charge cannot drain away it can discharge near the explosive or the detonator wiring, which is a known blasting hazard. An anti-static hose carries the charge safely to ground through the loader.

Which hose sizes fit pneumatic ANFO loaders?

We hold 16, 19, 25 and 32 mm bore (5/8 to 1-1/4 in); the right one must match the loader outlet and the blast-hole diameter. Send us the loader make and model or the current hose size and we confirm the matching bore and coil length.

What is the working temperature range?

The hose is made for use from -35 °C to +65 °C. This covers summer surface work in Saudi Arabia as well as cooler underground areas; avoid leaving coils in direct sun for long periods before use.

How often should a loading hose be inspected or replaced?

Check the hose before every shift for cuts, flat spots, wear through to the inner layer and damage at the couplings. Replace it when damage is found or as your mine's blasting procedure and the maker's guidance require; the conductivity of a worn hose cannot be relied on.

Do you supply a Certificate of Origin and test certificate?

Yes. A certificate of origin and the maker's test certificate can be supplied with the order; ask for them with your request for quotation so they are included in the delivery documents.

How fast can you deliver to mine sites in Saudi Arabia?

The hose is held in stock in Jeddah and we deliver to mine sites across the Kingdom. The delivery time to your site is stated on the quotation, together with the documents that go with the shipment.