العربية Get a quote

Technical guides

Documents for electrical supplies in Saudi Arabia: datasheets, test certificates, certificate of origin and conformity

On most Saudi projects, electrical materials are approved on paper before they reach site. This guide explains the documents buyers usually ask for, what each one shows, who issues it, and when to request it.

By the Six Winds engineering team · Updated

Quick answer

Electrical supplies in Saudi projects are usually backed by datasheets for the material submittal, manufacturer test certificates or type test reports, a certificate of origin issued through the exporting country’s chamber of commerce, and a delivery note and packing list. Many regulated products also need a Saudi conformity certificate through SASO’s SABER platform before import, so check the current SASO technical regulation for the product.

Step by step

  1. Read the specificationList the documents the project specification and the contract ask for, clause by clause, before you send the RFQ.
  2. Ask for datasheets with the quotationRequest the maker’s datasheet or catalogue page for each line so the material submittal can be prepared early.
  3. Confirm test documentsSay whether you need routine test certificates for the supplied items, type test reports for the design, or both.
  4. Confirm origin requirementsCheck whether the contract fixes a country of origin or needs a certificate of origin, and say so in the RFQ.
  5. Check Saudi conformityCheck the current SASO technical regulation for the product and whether a conformity certificate on SABER applies.
  6. Check the delivery documentsAt delivery, match the delivery note and packing list to the order and to the approved submittal.

Datasheets for the material submittal

A datasheet is the maker’s document that states what the product is: part number, ratings, dimensions, materials, the standards it is made to, and options. On consultant-supervised projects the contractor sends a material submittal with the datasheet for each item, and the item can be ordered or installed only after approval.

Ask for datasheets at the quotation stage, not after the order. Mark the exact part number on each sheet, because one catalogue page often covers a whole range. If an alternative is offered, its datasheet goes into the submittal with a clear note that it is an alternative.

Test certificates and type test reports

These are two different documents, and specifications often ask for both:

DocumentWhat it showsTypical use
Routine test certificateTests the maker carried out on the supplied item or batch, for example a cable drum or a switchgear assemblyDelivered with the goods; checked at receipt or handover
Type test reportTests carried out once on a representative product to prove the design meets its standardAttached to the submittal for switchgear, cables, Ex equipment and similar items

Type test reports are issued by the maker or by an independent test laboratory, and they cover a design or range, not a single delivery. Check that the report matches the offered item and the standard and edition the specification names. Where the specification asks for witnessed tests or factory inspection, agree it before the order.

Certificate of origin

A certificate of origin states the country where the goods were made. It normally names the exporter, the consignee, a description of the goods, quantities and marks, and the invoice it relates to. It is issued or endorsed by the chamber of commerce of the exporting country, and some contracts also ask for it to be legalised or attested.

Projects ask for it when the contract fixes a country or region of origin, when the client keeps an approved list of origins or makers, or when a government tender has origin or local content conditions. If you need it, say so in the RFQ: the certificate is tied to a shipment, so it is easier to arrange before the goods are shipped than after.

Delivery note, packing list and compliance statement

  • Delivery note: lists what was delivered against the purchase order, and is signed by the site on receipt.
  • Packing list: shows how the goods are packed: items per box, drum or crate, with weights and marks. It helps the store check the delivery and trace items later.
  • Compliance statement: a line-by-line table against the specification clauses, saying for each clause whether the offered item complies, complies with a deviation, or does not apply. Tenders often require it with the technical offer.

Check the part numbers on the delivery note against the approved submittal before the goods are installed. A mismatch is far easier to sort out at the gate than after installation.

Product conformity in Saudi Arabia: SASO and SABER

The Saudi Standards, Metrology and Quality Organization (SASO) issues technical regulations for many product groups, including electrical products. Products that fall under a regulation generally need a conformity certificate issued through the SABER platform before they are imported. This usually involves a product certificate and a certificate for each shipment.

Which products are covered, and what each regulation requires, is set by SASO and changes over time. Check the current SASO technical regulation for the product, or ask the importer to confirm whether it applies. This guide is general information, not legal or regulatory advice.

What Six Winds provides

We provide the documents the maker issues for the item: datasheets, catalogue pages, test certificates, type test reports, certificates of origin and conformity documents where they exist for that product. Ask for them on request with the quotation, and list which ones your specification needs, because some are issued with the shipment and take time to arrange.

Whether a document satisfies your contract is decided by your specification, your consultant and the relevant authority, so check those requirements on your side. To request an offer with documents, e-mail sales@sixwinds.com.sa or use the quotation form.

Common questions

What is a material submittal?

It is the package of datasheets and documents the contractor sends to the consultant for approval before an item is ordered or installed on a supervised project.

What is the difference between a test certificate and a type test report?

A routine test certificate covers tests on the supplied item or batch. A type test report covers tests made once on a representative product to prove the design meets its standard.

Who issues a certificate of origin?

It is issued or endorsed by the chamber of commerce in the exporting country, and states where the goods were made. Some contracts also ask for it to be legalised.

Do all electrical products need a SABER certificate?

Not all, but many regulated products do before import. Check the current SASO technical regulation for the product, or ask the importer to confirm.

Can I get the documents with the quotation?

Yes. We provide the documents the maker issues for the item on request with the quotation; tell us which ones your specification needs.

Need these items? E-mail your list or a nameplate photo to sales@sixwinds.com.sa, or use the RFQ form.

This guide is general information. Final selection must follow the project design, the applicable standards and the maker's data.